My name is Guy and I am an Amateur Radio Operator and like to build and test my own things. \\ 
This is a read only documentation source for my own use and // **limited info for others** // as they may have some interest.\\

If needed and you wish to contact me please see the [[https://www.qrz.com/db/N1GMM|N1GMM]] 
If you do not have access send email to "//guy at eastroad dot org//"

I make no claim as to the accuracy of the data here, I do not claim to be an Expert.  
I am entirely self taught.

Rigs:
I have lots of other transceivers, but always go back to using my cube (s). All these are sitting on a shelf for now.  I am not buying any more transceivers.. I have my life times worth here.  Bucks running low. (BUT I KEEP SPENDING! )

NOTE:  See anything here you want?  Let me know.  Things come and go.. I give a lot away for others needing radios.. but this has to stop.  I do not like selling things.

Many Radios, most repairs by me, some bought, a lot built by me.

Radios:
  - K2 #157 all options but dsp.. I resurrected this old baby.
  - SDR CUBES, my favorite and uses softrock items and a custom DSP.
  - OHR 20/40.  Built my me from an old kit.. was a challenge as the PCB had internal shorts in IF chain.
  - Redhot 20m  
  - NN1G old MarkII(?) 30m rig I bought broken and repaired.  Works great
  - K1EL 40m Open QRP rig.  I actually have 2.. one I am still working on
  - IC-745 with CW filters.  Rebuilt, need to be aligned 
  - Palstar R30 For my listening station.  No schematics. (anyone have any?) 
  - IC-R75 Modified filtering, for my listening station.  Great receiver
  - Hermes-Lite 2+
  - USRP B100
  - FDM-DUO brand new.  Dont know why I bought this very nice radio 
  - Perseus brand new.  Dont know why.

Rigs to be worked on:
   
  - SWAN 100mx.  neat rig bought used. dont know wny.. clean as a whistle.
  - Cubic Astro 150a needs work.  Almost first Microprocessor PLL but PLL is not working.. clean
  - Cubic Astro 200. needs a little work.. with external supply.  completely TTL PLL.
  - Century 21. Physical Dial failed (plastic gears) added a digital readout, overhauled PTO
  - Argonaut 505 complete, clean but old.  Have not looked at it PTO and dial work smooth.
  - HW8 very clean with power supply.

Boat Anchors:
  
  - HW101 + HP23-a completed recapping/other  and rebuilding supply.  Works fine.  Need to align completely
  - Drake R-4B completed recapping/other. Works fine.  Need to align completely
  - Drake T-4XB need to recap.  AC-4 power supply rebuilt and working.
  - Collins 75S-1 need to recap and check resistors.  Clean.
  - Collins 75S-3B need to recap and check resistors. Clean.